At KrystalKlor Inc., we focus all of our energy to being the very best at automation for swimming pools.
There are pool cleaning systems that vacuum on a daily basis. They get the dirt and debris out of the pool. They range from systems that pop up from the bottom of the pool and blow dirt around until the dirt gets caught in the filtration system, to others that vacuum the bottom of the pool which are attached to a hose.
KrystalKlor solely does chemistry. We build 4 systems - In Ground Spa, XL120, XL220, XL320 and Commercial, Industrial Grade. They are suitable for small or large residential and commercial pools (even small manmade community lakes). The KrystalKlor system is designed with very few (and no movable) parts. This system does what no other system in the world can do! It balances pH levels ideally (between 7.2 to 7.8) on a daily basis, with no person participation, for a year at a time. At the same time, the system will create a cleansing ion (the best cleansing ion that’s 100% active) and disperse between 1.5 to 4.0 ppm into your pool on a daily basis (depending on adjustment and needs of each particular pool). The KrystalKlor system does pH and your sanitation needs, and it won’t destroy alkalinity!
NO, it’s not a dispenser of chlorine and acid.
The KrystalKlor makes chemistry in a self contained unit that is relatively small. The unit is approx. 2’ tall, 16” in length, and 12” in width. The system operates on 220v – while your pool pump runs. Costs just pennies a year in energy! (ZERO Carbon Footprint)
Because this system creates chemistry inside the unit (not in the pool), there are no side effects. The water is drinkable (see independent chemical report). No chlorine odor, no red eyes, no itching, no chemistry done by homeowner. Chemistry is perfectly balanced, day after day. Yes, it’s true! And KrystalKlor does all this, even in the very harsh desert summers in Arizona!
So, the question is, why hasn’t anyone else figured out how to do such a thing? In an 8 billion dollar industry – there’s been no automation system that addresses pH, chlorine, and alkalinity needs until now. Surely, many have tried to produce such a system.
The process involved has been around for 50 years. But there are problems that occur. KrystalKlor has solved these problems. The process of creating a sanitation molecule and being able to adjust it’s pH level within itself, then adjusting the amount that you need for a particular pool size – that’s basically what we do.
Since we don’t add any acid to the pool, we don’t destroy the alkalinity. The huge benefit is with 100% active killing molecule that you raise to 4.5 ppm on an OTO test and no side effects. That has never been done before!
These units can produce 388 lbs. of 100% cleansing ion, with an adjustable pH. It is produced 8 hrs per day for 6 months and 4 hours per day for another 6 months of time.
The material used is 1 part proprietary 4% solution. The other part is an ordinary solution that is in all swimming pool retail stores.
The cost for KrystalKlor to produce such sanitizer equilivant is about $45. To get an equal amount of store bought sanitizer, such as trichlor tablets, liquid chlorine - remember, you still have to buy and add acid and chemicals to your pool – you’re looking at $450 to $750 yearly. You still have to do it by hand. Another option is to hire a pool guy – which can cost $900 to $1200 yearly (just for residential, not a large pool).
Commercial pools are very exciting because as the size of water increases, the benefits multiply. For example, you can balance chemistry in a 100,000 gal pool for as little as $400 yearly. Without KrystalKlor, it may cost $4000-5000 yearly. Now, that’s an impressive savings! |
